purpose
This equipment is used to tighten the built-in valves of some shock absorbers, and it is a vertical frame structure as a whole;
technical parameter
a) Tooling air pressure: (0.4-0.6) MPa
b) Installation cycle time: 20s/piece;
c) Power supply voltage: AC220V 50Hz;
d) Power supply power: 1.5kW;
e) Operating weight: 1.2 t
Working principle and characteristics
One station is used for loading, the upper part is connected and fixed on the guide slide by the guide pillar and support plate through the seam and nut, the guide slide is driven by the servo motor to move forward and backward, so as to avoid interference when loading the workpiece. The positioning tooling is installed on the base plate, the lower drive rotating mechanism is driven by the servo motor+reducer to rotate the workpiece with a toothed synchronous belt, and the torque is accurately controlled by the Taiwan Delta torque wrench, Ensure torque consistency.
